Intelligent self-priming pump (referred to as electric pump), mainly by the motor, water pump, sealing three parts. The motor is an asynchronous motor, the impeller structure is vortex, higher head can be obtained,the electric pump is radial suction, with self-absorption function, the pump and motor are equipped with a single-ended mechanical seal, the rotating gear ring on the shaft plays an auxiliary role in dumping,isolation fixed stop seal using "O"-shaped rubber seal as a static seal.
Suitable for family life water collection, well water collection, tap water pressure, garden irrigation, vegetable shed watering and aquaculture and other occasions.Also suitable for home bathrooms, washing machines, toilet water supercharged roof water tower supercharged, garden watering system,shampoo shop, snack bar supercharged water supply, underground or open-air well automatic water supply,hotels,bathhouses,hair salonsroom heating and high- rise residential automatic supercharged water, industrial equipment supporting automatic recycling water supply.
Conditions of use：
The electric pump should work continuously under the following conditions of use;
1.the transport medium temperature does not exceed 0-100 degrees C;
2.the MEDIA PH value between 6.5-8.5;
3.solid impurities volume ratio does not exceed 0.1%,particle size is not greater than 0.2 mm;
4.the power supply frequency is 50Hz, the voltage is single-phase AC 220V,three-phase Ao380V. Voltage fluctuations range from 0.9-1.1 times the rating;
5.when the temperature is below 0 degrees C,should do of antifreeze work, when not using need open the bottom of the pump body waterproof screws, drain the pump body water, protecting from freezing the pump body;
Note:Automatic before use. It is important to ensure that the tube is not leaking.